I have to use a cloth and a small tool to clean up all the dirty bits inside the valve body, and not removing any metal balls or spring devices so we won't make mistake when putting them back. And this is how it looks like after cleaning:
After completed valve body cleaning, we started to put everything back together with new gaskets, oil sealing and o-rings, basically in a reverse sequence of disassembling. Every parts were carefully cleaned with gasoline, dried with air gun and greased with ATF before installation back. And we referred to the pictures taken at disassembling so we would not put anything back in a wrong way or position.
This is the special tool to remove oil sealing:
沒有留言:
張貼留言